Ricoh AFICIO 1035 Copy Reference Manual page 231

❖ ❖ ❖ ❖ 1 sided→ → → → 2 sided Auto Margin:T to T
In 1 sided → 2 sided Duplex mode, you can specify whether to automatically
set the margins on the back side.
The margin is set to the same value of "Back Margin: Left/Right".
Note
❒ Default:
• Metric version: Right 5mm
• Inch version: Right 0.2"
❖ ❖ ❖ ❖ 1 sided→ → → → 2 sided Auto Margin:T to B
In 1 sided → 2 sided Duplex mode, you can specify whether to automatically
set the margins on the back side. The value set for "Back Margin: Top/Bot-
tom" is used.
❖ ❖ ❖ ❖ Erase Border Width
The default setting of the width of the erased margins in Erase Border mode
can be changed as follows:
• Metric version: 3 – 50mm in 1mm steps
• Inch version: 0.1" – 2.0" in 0.1" steps
Note
❒ Default:
• Metric version: 10mm
• Inch version: 0.4"
❖ ❖ ❖ ❖ Erase Original Shadow in Combine
In Combine Copy or Booklet/Magazine Copy mode, you can specify whether
to erase a 3mm, 0.1" bounding margin around all four edges of each original.
Note
❒ Default: Yes
❖ ❖ ❖ ❖ Erase Center Width
The default setting of the width of the erased margins in Erase Centre mode
can be changed as follows:
• Metric version: 2 – 99mm in 1mm steps
• Inch version: 0.1" – 3.9" in 0.1" steps
Note
❒ Default:
• Metric version: 10mm
• Inch version: 0.4"
1
Edit /
2
5
217