Erase - Ricoh AFICIO 1035 Copy Reference Manual

Erase

This function erases the centre and/
or all four sides of the original image.
This is useful for avoiding shadows
on the copy image caused by the
bound originals, such as books.
This function can be used in three
ways:
❖ ❖ ❖ ❖ Border
This mode erases the edge margin
of the original image.
❖ ❖ ❖ ❖ Center
This mode erases the centre mar-
gin of the original image.
❖ ❖ ❖ ❖ Center/Border
This mode erases both the centre
and edge margins of the original
image.
Note
❒ You can change the width of the
erased margin as follows:
Metric 2 – 99mm (in 1mm steps)
version
Inch 0.2" – 3.9" (in 0.1" steps)
version
❒ The default setting of the erased
margin is as follows. You can
change this settings with the User
Tools. ⇒ "Erase Border Width"
and "Erase Center Width" in P.216
1
"Edit / ".
2
Metric 10mm
version
Inch 0.4"
version
❒ The width of the erased margin
varies depending on the reproduc-
tion ratio.
❒ If the size of the original is differ-
ent from sizes listed in the follow-
ing chart, the erased margin might
be shifted.
❖ ❖ ❖ ❖ Metric version
Where Origi- Paper Size and Orien-
nal Is Set tation
Exposure glass A3L, B4L, A4KL,
B5KL
Document A3L, B4L, A4KL,
feeder B5KL, A5KL,
B6KL, 11" × 17"L
❖ ❖ ❖ ❖ Inch version
Where Origi- Paper Size and Orien-
nal Is Set tation
Exposure glass 11" × 17"L, 8
14"L, 8
A4KL, 11" × 17"L,
Document
feeder
8
8
5
❒ The relationship between the orig-
inal orientation and the erased part
is as follows:
L original
❒ 1: Erased part
❒ 2: 2–99mm
Erase
" ×
1
/
2
" × 11"KL
1
/
2
" × 14"L,
1
/
2
" × 11"KL,
1
/
2
" × 8
1 1
/ / "KL
2 2
K original
2
113