Operation of Current Device
The power supply cord contains a current device that senses damage to the power cord. Test your
power supply cord as follows:
1.
Plug in the air conditioner.
2.
The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
3.
Press the RESET button. Again you will notice a click as the button engages.
4.
The power supply cord is now supplying electricity to the unit. (On some products this is also
indicated by a light on the plug head.)
NOTES
•
Do not use this device to turn the unit on or off .
•
Always make sure the RESET button is pushed in for correct operation.
•
The power supply must be replaced if it fails to reset when either the TEST button is pushed, or it
can not be reset. Please contact Customer Service.
•
If power supply cord is damaged, it can not be repaired. It MUST be replaced with a new cord.
Please contact Customer Service.
Page 6
User Manual