Install Support Bracket - Toshiba RAC-WK0511CMU User Manual

Fig. 6
Fig. 5

5. Install Support Bracket

Fig. 7
Fig.6
RAC-WK05 only
Fig. 8
Fig.8
Fig. 9
Fig. 8
FOAM SEAL
Fig. 10
Fig. 9
Page 16
B. Extend the side panels out against the window frame (Fig. 6).
window
frame
A. Place the frame lock between the frame extensions and the
window sill as shown (Fig. 7).
Drive 3/4" (19 mm) or 1/2" (12.7 mm) locking screws through
the frame lock and into the sill.
NOTE
To prevent window sill from splitting, drill 1/8" (3 mm) pilot holes
before driving screws.
Models RAC-WK06/08/10/12/15/18
C. To secure lower sash in place, attach right angle sash lock with
3/4" (19 mm) or 1/2" (12.7 mm) screw as shown (Fig. 9).
D. Cut Window sash seal foam and insert it in the space between
the upper and lower sashes (Fig. 10).
B. Drive 3/4" (19 mm) or 1/2"
Fig. 8
Fig.8
(12.7 mm) locking screws
through frame holes into
window sash (Fig. 8).
User Manual