Setting Custom Sized Originals - Ricoh 4506 Copy Reference Manual

Basics

Setting Custom Sized Originals

When copying from custom sized originals, specify the size of the originals so
that copies are well aligned.
1
Limitation
❒ You must set your custom size originals on the exposure glass.
Reference
For the standard sizes the machine can detect, ⇒ P.14 "Standard Size Origi-
nals".
Note
❒ The dimensions you can enter must be within the following ranges:
Vertical size
Horizontal size
A
Select the copy paper size.
B
Press the [Custom Size Orig.] key.
copy4.tif
C
Make sure that the [Orig. Horiz.] key is selected. Enter the horizontal size
with the number keys, then press the [#] key.
copy5.tif
Note
❒ To change the value entered, press the [Clear] key and enter a new value.
22
50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)
50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)