Starting The Machine - Ricoh 4506 Copy Reference Manual

Basics

Starting the Machine

A
Press the operation switch to make the On indicator go on.
1
Tlcs120n.eps
Note
❒ If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
❒ During the warm-up period (Less than 270 seconds), you can use the Auto
Start function. ⇒ P.51 "Auto Start".
When the machine is set for user codes
A
Enter your user code using the number keys. Then press the { { { { #} } } } key.
Note
❒ To prevent others from making copies with your user code, press the {Clear
Modes} key and the {Clear /Stop} key simultaneously after copying.
Reference
For more about user codes, ⇒ P.179 "General Features".
When the Energy Saver indicator is lit
The machine is in Energy Saver mode.
A
Press any key.
The machine will return to the ready condition.
Note
❒ The machine will also return to the ready condition when an original is set
in the document feeder, or when the platen cover or the document feeder
is opened.
12