Scan Mode - Frymaster FilterQuick Version 2 Operation Manual

Left Display
START POLISH
DRAINING
POLISHING 15:00 countdown timer
FILLING
-------- or LOW -------- or LOW
TEMP alternating TEMP alternating with the
with the temperature. temperature.

1.11 SCAN Mode

The daily stats mode can be used to see current stats about any product quickly throughout the day. Follow the steps below
to view stats.
Left Display Right Display
READY READY
SELECT
PRODUCT
Long name
8 character product name
Short
4 character abbreviated
product name
Name
COOKS
Number or DISABLED
REMAINING
COOKS
Number
TODAY
COOKS
Number
SINCE LAST
DISPOSE
1 TIME
Time
1 TEMPR
Temperature
1
Number
Sensitivity
1 ALARM
Shake Time
*
TIME
1 ALARM Shake, stir, or
numbered alarm
*
NAME
1 ALARM AUTO or MANUAL
*
MODE
1 ALARM Short, medium,
long, double or
*
TONE
Right Display
press either arrow under CONFIRM.
Press button with blinking LED.
None required.
None required. The oil flows from the filter pan to the frypot and
back to the filter pan for 15 minutes. Default is 15 minutes.
None required.
Fryer starts heating back to temperature.
Explanation/Action
Press the Exit/Scan button.
Press a product button to check daily stats.
Press  to progress to next product stat.
Press  to progress to next product stat.
Number of cooks remaining until filter prompt. Press .
Number of cooks completed today. Press .
Numbers of cooks since last dispose. Press .
Time that product is programmed to cook. Press .
Temperature that product is programmed to cook. Press .
The level of sensitivity the product is programmed to cook at. Press .
The time during a cook till a product shake alarm occurs. Press .
This is the name of the alarm. Press .
The alarm mode the product is programmed with. Press .
The shake alarm tone the product is programmed with. Press .
Action
1-23