Frymaster FilterQuick Version 2 Operation Manual page 14

Left Display Right Display
Number
Filters
and day
Filters – Number
prior week and day
Filters Number
bypassED and day
Number
Cooks
and day
Exit Exit
SELECTED
PERIOD
STATS
Date TIME
COOKS Number
QUIT COOKS Number
On HOURS Number
Reset
Yes no
usage
Reset
Enter code
usage
Complete
Exit Exit
LAST LOAD
STATS
Product
Product
Name
Number
Started
Minutes
Actual Number
time Minutes
Program Number
time Minutes
Max TEMP Number
Min TEMP Number
Avg TEMP Number
Heat on %
Ready for
Yes or no
Cook
TPM
Current Day Current Date
Number/– –
TPM
Current Day
Press  to scroll number of times the vat was filtered on that day of the prior
week. Press .
Press  to scroll number of daily filter cycles in the prior week. Press .
Press  button once to return to Info Mode menu, or Exit/Scan button once to
return the controller to OFF.
Press  to scroll number of times the filter prompt was bypassed on that day
in the prior week. Press .
Press  to scroll number of cook cycles on that day of the prior week
occurred. Press .
Press  button once and press  to scroll to desired choice. Once desired
choice is displayed, press  button or press the Scan button once to return the
controller to OFF.
Press  to scroll Info Mode Menu: Last Dispose Stats, Daily Stats, Selected
Period Stats, Last Load Stats with the desired stats displayed, press .
Press . (This is the date and time the selected period started.)
Press . (This is the total number of cooks since start of selected period.)
Press . (This is the total number of cooks that were cancelled since start of the
selected period.)
Press . (This is the total number of hours the fryer was on since start of the
selected period.)
Press  to scroll or to set start of new selected period stats.
Enter 1656.
Press  button once and press  to scroll to desired choice. Once desired
choice is displayed, press  button or press the Scan button once to return the
controller to OFF.
With the desired stats displayed, press .
Press .
Press . (This is the time the last cook started.)
Press . (This is the actual cook time including stretch time.)
Press . (This is the programmed cook time.)
Press . (This is the maximum temperature of the oil during the last cook.)
Press . (This is the minimum temperature of the oil during the last cook.)
Press . (This is the average temperature of the oil during the last cook.)
Press . (This is the percentage of the cook time the heat source was on during
the last cook.)
Press . (This displays yes if the fryer was back to set temperature before the
cook cycle was started.)
With the desired stats displayed, press .
Press  to view TPM.
Press  to scroll for last measured TPM value that day. Press .
NOTE: If not installed; or invalid or no reading is taken, dashed lines are
shown.
1-9
Action