Qsonica Q700 Operation Manual page 27

the manufacturer for assistance if the threading is chipped or damaged in anyw ay.
Replacement Tip Removal
Replacement Tip Removal
* Note: When tightening a Microtip the tip must not be in contact w ith the w ork surface.
Alw ays have the tip ext ending off of the table or w ork surface to minimize stress to the
tip.
System Cleaning Instructions
The generator and converter may be cleaned using an acid-free cleaning solution (i.e. glass
cleaner).
Probes should be cleaned using isopropyl alcohol. Probes are made from titanium and can
be autoclaved (the converter is an electrical part and cannot be sterilized in this manner).
Before each procedure place the probe tip in w ater or alcohol and turn the pow er on for a
few seconds t o remove residue. The tip also can be sterilized using alcohol w ith t he pow er
on.
Replacement Tip Tightening
Replacement Tip Tightening
27
Rev. 6-12