Qsonica Q700 Operation Manual page 12

FUNCTIONS OF KEYS, CONTROLS, INDICATORS, AND CONNECTORS
Touch screen display
0 – 9 key
EXIT
key
ENT
key
CLR
key
RUN
key
SAVE
key
START/STOP
key
PAUSE
key
▲ ▼
key
For explanations of each screen and button on the ultrasonic processor and complete
programming instructions please see Section 7 of this manual.
FRONT PANEL
Displays prompts and control parameters including:
• Amplitude selected
• Output pow er delivered to the probe in w atts
• Selected duration of processing
• Actual processing time
• Elapsed time
• Set and read temperature
• Pulse on/off duration
• Accumulated amount of energy in Joules delivered to the probe
Input digits for programming screens
Moves to previous screen
Completes parameter entry on programming screens
Deletes selected parameter entry
To proceed to program run screen
Stores a program to the selected memory number. Up to 10
programs (0-9) can be stored.
Starts or stops the ultrasonics.
Suspends operation, w ithout clearing program/run totals. Press
pause again to resume program/run and continue accumulating
run data.
Used to set the amplitude of vibration at the probe tip. Also used
to increase or decrease the amplitude in small increments w hile
the unit is runnng.
12
Rev. 6-12