Troubleshooting - Yamaha EF4500iSE Installation And Operation Manual

TROUBLESHOOTING

● The generator does not start by remote control. (But the generator can be started
by turning the engine switch to "START".)
8 The operation of "ON" button of remote control transmitter is incorrect.
→ Push the "ON" button twice at the 0.5-second interval. (See "Starting the generator by remote control"
page 6.)
8 The remote control switch of the generator is in "OFF" position.
→Turn the remote control switch of the generator to "ON" position. (See "Preparing the remote control of
generator" page 6.)
8 The dry cell batteries of remote control transmitter have discharged.
→Replace the dry cell batteries. (See "How to replace dry cell batteries" page 7.)
8 The radio waves do not reach the generator.
→ Move to another location and try the remote control.
● The remote control transmitter is lost.
Please consult a Yamaha dealer.
5. Turn the engine switch to "STOP".
6. Reconnect the short harness coupler as it was.
7. Check the operation of remote control. (See "How to use
the remote control" page 4.)
NOTE:
If the remote control does not operate normally, turn the engine
switch to "STOP" and repeat procedure from 2 to 7.
8. Reassemble the control panel and front panel correctly.
(See "Installing procedure" page 2.)
9
page