Using The Mask-Fitting Feature; Reminders On The Vpap Lcd - ResMed VPAP AUTO 25 User Manual

Using the Mask-Fitting feature

The VPAP Auto
fit your mask properly. The mask-fitting feature delivers air pressure for a three-
minute period, prior to starting treatment, for checking and adjusting your mask fit to
minimize leaks.
To use the mask-fitting feature:
1
Fit your mask as described in the mask user instructions.
2
Hold down
the following screen appears:
The LCD displays a mask-fit star rating from zero to five stars. Three to five stars
indicates a good fit or better. Zero to two stars indicates that the mask needs to be
adjusted.

Reminders on the VPAP LCD

Your clinician may have set your VPAP device to remind you about important events,
such as when to replace your mask, when to insert your Data Card (if your device is
Data Card enabled) and so on.
The reminder message is displayed on the LCD and is visible if the device is not
delivering therapy. The backlight on the LCD flashes when a message is displayed.
Your clinician can set any of the following reminders on your LCD:
Message
INSERT
CARD
REPLACE
MASK
CALL
PROVIDER
REPLACE
FILTER
SERVICE
DUE
Customized
messages
8
25,
VPAP ST and VPAP S include a mask-fitting feature to help you
for at least three seconds until air pressure delivery starts and
MASK FIT:
*****
excelnt
Description
May appear if your device is
Data Card enabled.
Reminds you that your mask
is due for replacement.
Reminds you to contact your
clinician; for example to
discuss your therapy.
Reminds you to replace the
air filter on your device.
Reminds you to return your
device for service.
Your clinician may also set
reminders for other reasons;
for example to call a
particular person or number.
Mask-fit star rating
Action
Insert your Data Card and follow any
instructions that your clinician has given you.
When you have done this, the message will
disappear from the LCD. Pressing
will also remove the message.
Press (Ok) to remove the message from
your LCD and replace your mask with a new
one.
Press (Ok) to remove the message from
your LCD and contact your clinician/service
provider.
Press (Ok) to remove the message from
your LCD and replace the air filter.
Press (Ok) to remove the message from
your LCD and contact your clinician/service
provider.
Press (Ok) to remove the message from
your LCD and contact your clinician/service
provider.
(Ok)