Specifications; Service - GPI FM-300H Owner's Manual

Electronic disc meter
Hide thumbs Also See for FM-300H:
Table of Contents

Advertisement

SPECIFICATIONS

Applications
Flow Range: 2-20 GPM (7-75 LPM)
Operating Environment: Outdoor, oper-
ating temperature range of 0° F
to +130° F (-18° C to +54° C).
Electronic Nutating Disc designed
for mounting on hoses or pumps of
fluid transfer systems.
Power: 9 Volt alkaline battery
Maximum Working Pressure: 50 PSIG
(3.4 bar)
Maximum Display Value:
999,999 (x100)
Accuracy
Factory Calibration: ± 2%
Field Calibration:
Materials
Housing: PBT Polyester
Seals: Viton
Wetted Parts: PBT Polyester, 303/304
Stainless Steel, Ferrite
Mechanical
Inlet:
1 inch NPT female
Outlet: 1 inch NPT male
Dimensions
Height: 4 inches (10.3 cm)
Depth: 3.1 inches (8.1 cm)
Width: 6 inches (15.2 cm)
Shipping Weight
3 lbs. (1.4 kg)
Storage Temperature
-40° F to +158° F (-40° C to +70° C)
12
± 0.5%

SERVICE

For warranty consideration, parts, or
other servicing information, please con-
tact your local distributor. If you need
further assistance, call the GPI Customer
Service Department in Wichita, Kansas,
during normal business hours.
1-800-835-0113
To obtain prompt, efficient service, al-
ways be prepared with the following
information:
1. The model number of your meter.
2. The serial number or manufacturing
date code of your meter.
3. Specific information about part num-
bers and descriptions.
For warranty work always be prepared
with your original sales slip or other evi-
dence of purchase date.
Returning Parts
Please contact the factory before re-
turning any parts. It may be possible to
diagnose the trouble and identify needed
parts in a telephone call or letter. GPI can
also inform you of any special handling
requirements you will need to follow
covering the transportation and handling
of equipment which has been used to
transfer hazardous liquids.
CAUTION
Do not return meters without spe-
cific authority from the GPI Cus-
tomer Service Department. Due to
strict regulations governing trans-
portation, handling, and disposal of
hazardous liquids, GPI will not ac-
cept meters for rework unless they
are completely free of chemical.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fm-300hr

Table of Contents