Table of Contents
Advertisement
Search (For Default Setting Changes)
A listing of all parameters that have been changed from the factory default settings may be viewed
sequentially by accessing the Search screen (Program Search).
The Search feature allows the user to view (and/or change) the parameters that are different from the
factory default settings. From the Search screen, press the Rotary Encoder to start the Search
function. Once started, the system automatically scrolls through all of the system parameters and halts
once reaching a changed parameter.
After stopping at a changed parameter, the Rotary Encoder may be clicked either clockwise or
counter-clockwise once to continue scrolling either forward or reverse, respectively. With each Up or
Down click from a stop, the system scrolls and stops at the next parameter that has been changed.
Press the Rotary Encoder once while the system is halted at a changed parameter to enter the Edit
mode (parameter title flashes). Turn the Rotary Encoder to change the setting.
While still in the Edit mode, press the Mode key to exit the Search function without saving the change,
press the ESC key to return to the Search mode, or press the Rotary Encoder to accept and save the
new setting.
Note:
Some parameters use the unsaved changed value until the ASD is reset or powered off
(e.g., Frequency Command, Accel/Decel, etc.).
Pressing the Mode key when done searching or when halted at a changed parameter returns the system
to the primary menu loop.
48
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Q9 ASD Quick Start Guide
Advertisement
Table of Contents
