Auto-reader and rapid readout biological indicator (2 pages)
Summary of Contents for 3M Attest Auto-reader 490H
Page 1
Attest Auto-reader 490H ™ ™ 1 Operator’s Manual - Manual do Operador 2 Manuel de l’utilisateur = Εγχειρίδιο Χειριστή 3 Benutzerhandbuch H Instrukcja obsługi 4 Manuale dell’operatore F Příručka pro obsluhu 5 Manual del usuario S Priročnik za uporabo 5 Manual del operador M Инструкция...
Safety and Precautions .............................2 Health and Safety Information..........................3 Explanation of Product and Packaging Label Symbols ..................3 Specifications ................................4 Instructions for Use ..............................4 Features ..................................7 Care and Cleaning ..............................8 Troubleshooting Guide...............................8 Optional 3M™ Attest™ Auto‑reader 490H WebApp ....................9 Troubleshooting the 3M™ Attest™ Auto‑reader 490H WebApp ................12 Repair and Replacement............................12...
Sample printouts, graphics, displays and screens are for information and illustration supplied by 3M. If this product is used in a manner not specified, the protection provided purposes only, and shall not be used for clinical or maintenance evaluations. Data shown by the product may be impaired.
LABEL SYMBOLS Incubate the 3M™ Attest™ Rapid Readout Biological Indicator 1295 only in the 3M™ Attest™ Auto‑reader 490H i.e., match the pink cap color of the 1295 BI with Attention ‑ Refer to the instructions for use the pink color‑coded configuration sticker surrounding the 3M™ Attest™ Auto‑reader 490H incubation wells.
AC grounded outlet. Wait 30 Minutes Before Using Once plugged in, allow a 30 minute warm‑up period before placing 3M™ Attest™ Rapid Readout Biological Indicators 1295 into the incubation wells. The C1 caution code will disappear when proper incubation temperature is reached.
Page 7
Please familiarize yourself with the face of the 3M™ Attest™ Auto‑reader 490H: Setting the 3M™ Attest™ Auto‑reader 490H Clock The 3M™ Attest™ Auto‑reader 490H date and time are displayed in this format: Wells YYYY‑MM‑DD HH:MM, with the time displayed using a 24 hour clock. To change the 1.
Page 8
Biological Indicator 1295 vial absorbing fluorescent residue from a chemical indicator INSTRUCTIONS FOR USE – ADDITIONAL INFORMATION or tape, place the 3M™ Attest™ Rapid Readout Biological Indicator vial so it does not come in direct contact with chemical indicators or tape. BI Placement Remaining incubation time, in minutes, will be displayed on the LCD display to indicate the 3M™...
An alarm will also sound if a 3M™ Attest™ Rapid Readout Biological Indicator on the front of the unit or using the optional 3M™ Attest™ Auto‑reader 490H Web App. is removed from the 3M™ Attest™ Auto‑reader 490H well before a final result has been Optional 3M™...
TROUBLESHOOTING GUIDE In the event of an error code, unplug the 3M™ Attest™ Auto‑reader 490H and plug it back in to initiate the self‑diagnostic test. If error code re‑occurs, call for repair or replacement. The LCD display will indicate detected malfunctions by displaying a caution or error code under affected BI wells. The audible alarm, if active, sounds and the LCD display backlight flashes to alert the user to all caution (except C1) and error codes.
Web App using a URL based upon either the 3M™ Attest™ Auto-reader 490H serial a) Status page number or the IP Address. To view the 3M™ Attest™ Auto-reader 490H Web App from a wireless device such as a mobile hand-held device or a computer on a sub-net different from that to which the 3M™...
Page 12
After inserting a new 3M™ Attest™ Rapid Readout BI in the 3M™ Attest™ Notes Auto‑reader 490H, it is a best practice to open the 3M™ Attest™ Auto‑reader 490H Web App Results Detail page for that BI by clicking on the appropriate well number from the Status page.
Page 13
The speaker icon will disappear from the 3M™ Attest™ Auto‑reader 490H LCD panel. Attest Auto-reader Naming the 3M™ Attest™ Auto‑reader 490H may be useful in facilities with multiple units. The assigned nickname will appear on the 3M™ Attest™ 490H Nickname Auto‑reader 490H Web App Status page.
TROUBLESHOOTING THE 3M™ ATTEST™ AUTO‑READER 490H WEB APP Issue Problem Solution Ensure 3M™ Attest™ Auto‑reader 490H Ethernet cable is connected to a live jack and that connection to 3M™ Attest™ Auto‑reader 490H is secure. 3M™ Attest™ Auto‑reader 490H and/or Ensure computer is connected to network.
Need help?
Do you have a question about the Attest Auto-reader 490H and is the answer not in the manual?
Questions and answers