Led Indicators - TP-Link M7300 Quick Installation Manual

tpMiFi APP
How to download tpMiFi
1. Download the tpMiFi app from the Apple
App Store or Google Play Store, or simply
scan the QR code.
2. Ensure your device is wirelessly connected
to the Mobile Wi-Fi.
3. Launch the app and use the default admin
to login.
How to use tpMiFi
1. Monitor and limit your data usage.
Menu
M7300
China Unicom
4G
250
MB
Total：1.00 GB Data Usage Settings
Used
Total：1.00GB
0.00 B/S 0.00 B/S
Battery status
Online Wi-Fi devices
Battery 5 Wi-Fi Users
Status: 51% Online: 5
Home Screen
Messages
SD card status
12 SMS SD Sharing
Unread:12 Free:3.6GB
FAQ (Frequently Asked Questions)
Q1. Is there an alternative to manage the Mobile Wi-Fi besides
the tpMiFi app?
A. You can manage the Mobile Wi-Fi by using its web management page.
1. Connect your wireless device to the Mobile Wi-Fi.
2. Launch a web browser and enter http://tplinkmifi.net or http://192.168.0.1 in
the address bar. Enter admin to log in.
Q2. What should I do if I cannot log in to the web management
page?
A1. Verify that your device is connected to the Mobile Wi-Fi.
A2. Verify that you have entered http://tplinkmifi.net or http://192.168.0.1 correctly.
A3. Verify that your device is set to obtain an IP address automatically.
Q3. What should I do if the Internet LED doesn't light up (I
cannot access the internet)?
A1. Check PIN status
Refer to Q1 to log in to the web management page on your phone. If the current
SIM card status is PIN Locked, you will need to unlock it using the PIN code.
A2. Verify the mobile carrier parameters
1. Refer to Q1 to log in to the web management page on your phone. Go to Dial-up
> Device > View Profile Details and verify the parameters (i.e. APN, Username,
2 . Manage network access
Tap the Wi-Fi Users icon on Home Screen and swipe left the device to block
and then tap Block.
Scan to download
Wi-Fi Users
3 . Share multimedia files
Tap the SD Sharing icon on Home Screen and select the sharing method:
Wi-Fi Mode or USB Mode.
SD Sharing
and Password) provided by your mobile carrier are correctly entered.
2. If the mobile carrier parameters are not correct, return to the Dial-up page and create
a new profile with the correct information. Then choose the new created profile from
the Profile List.
A3. Check the Data Roaming settings
If your SIM card is operated in a roaming service area, refer to Q1 to log in to the web
management page on your phone. Go to Dial-up and enable the Data Roaming
option.
A4. Check Mobile Data
Refer to Q1 to log in to the web management page on your phone. Go to Dial-up to
verify that Mobile Data is On. If not, enable it.
A5. Check Data Limit
Refer to Q1 to log in to the web management page on your phone. Go to Device >
Data Usage Settings to check whether your data usage has exceeded the
Total/Monthly allowance.
Q4. What should I do if my internet speed is slow?
A1. Refer to Q1 to log in to the web management page on your phone. Go to Device >
Advanced > Wireless Band to switch between 2.4GHz and 5GHz band for better
connectivity.
A2. Refer to Q1 to log in to the web management page on your phone. Go to Device >
Network > Network Mode and try a different network.

LED Indicators

Wi-Fi Users
My device
Edward S1
A1-B2-C3-D4-E5-F6
Online devices
Edward S2
Block
A1-B2-C3-D4-E5-F6
Note: The LEDs will turn off automatically after idling for 15 seconds. To check the LED
Edward S3
A1-B2-C3-D4-E5-F6
Charging Your Mobile Wi-Fi
Blocked devices
Edward S5
Resume
A1-B2-C3-D4-E5-F6
Method 1
Via a Wall Outlet (Recommended)
SD Sharing Edit
Wi-Fi Mode USB Mode
Folder 01
GUI
New
New folder Upload
!
Q5. How do I restore the Mobile Wi-Fi to its factory default
Safety Information
LED Status Explanation
The Wi-Fi is enabled.
On
(Wi-Fi)
(Internet) On The Mobile Wi-Fi is connected to the internet.
On The Mobile Wi-Fi is on.
Red The battery level is lower than 10%.
(Battery)
Blinking Green The Mobile Wi-Fi is charging.
status, press the Power button to turn them on again.
Method 2
Via a Computer
5V/1A
The Battery LED is solid green when the Mobile Wi-Fi is fully charged.
The power adapter is not provided by TP-Link.
settings?
A. With the Mobile Wi-Fi powered on, remove the cover and then use a pin to press
and hold the Reset button until all LEDs turn on momentarily.
Note: Resetting the device to its factory defaults will clear all previous configuration.
· Keep the device away from water, fire, humidity or hot environments.
· Do not attempt to disassemble, repair, or modify the device.
· Do not use damaged charger or USB cable to charge the device.
· Do not use any other chargers than those recommended.
· Do not use the device where wireless devices are not allowed.
· Do not disassemble, crush, puncture, short external contacts, or dispose of
the battery in fire or water.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Please read and follow the above safety information when operating the device. We cannot
guarantee that no accidents or damage will occur due to improper use of the device. Please
use this product with care and operate at your own risk.
For technical support and other information, please visit
http://www.tp-link.com/support