BMW F 750 GS Special vehicle 2018 Rider's Manual page 224

Replacing bulbs for front
10
and rear turn indicators
with LED flashing turn indicat-
222
ors OE
LED flashing turn indicators
can only be replaced as a com-
plete unit. Consult a specialist
workshop, preferably an author-
ised BMW Motorrad Retailer.
without LED flashing turn indic-
OE
ators
Place the motorcycle on its
z
stand on firm, even ground.
Switch off the ignition.
Remove the bolt 1.
Pull the glass out of the re-
flector housing at the threaded-
fastener side.
Remove bulb 2 from the light
housing by turning anti-clock-
wise.
Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
with LED flashing turn indic-
OE
ators
LED
Use a clean, dry cloth to hold
the new bulb in order to keep
the glass free of foreign matter.