Advertisement
1. Outline
The M3T-FLX-144NSE is a converter board for connecting the
160-core flexible cable FLX160 to a foot pattern for 144-pin
0.4-mm-pitch TQFP (144PFB-A).
2. Package Components (See Figure 1)
(1) M3T-FLX-144NSE converter board
(2) YQPACK144SE (made by Tokyo Eletech Corporation)
(3) NQPACK144SE (made by Tokyo Eletech Corporation)
(4) YQ-GUIDE
(4
pieces)
Corporation)
(5) M3T-FLX-144NSE User's Manual (This manual)
3. Specifications
Table 1 Specifications
Applicable package
Insertion/removal
iterations of connector
4. Usage (See Figure 2)
The M3T-FLX-144NSE can be used for debugging and board
mounted
evaluation
in
NQPACK144SE on the target system.
(1) For debugging
Mount the NQPACK144SE and YQPACK144SE on the
foot pattern of the target system in that order. And connect
the probe of the emulation pod to the upper connector of
the
M3T-FLX-144NSE.
YQPACK144SE and the M3T-FLX-144NSE.
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK144SE (separately available) in
that order on the NQPACK144SE on the target system.
Before using the M3T-FLX-144NSE, be sure to read "7.
Precautions" on page 4.
(made
by
Tokyo
Eletech
144PFB-A
(144-pin 0.4-mm-pitch TQFP)
50 times guaranteed
common
by
mounting
Then
connect
M3T-FLX-144NSE
YQ-GUIDE (x4)
Figure 1 Package components of the M3T-FLX-144NSE
(1) Debugging
M3T-FLX-144NSE
YQ-GUIDE (x4)
the
YQPACK144SE
the
NQPACK144SE
144-pin 0.4-mm-pitch
(144PFB-A) foot pattern
Figure 2 Usage of the M3T-FLX-144NSE
(2/4)
YQPACK144SE
NQPACK144SE
Probe of emulation pod
(2) Onboard evaluation
HQPACK144SE
(separately available)
MCU with on-chip flash
memory or one-time PROM
: No. 1 pin
Be sure to align the pins.
Advertisement
