Advertisement
5. Connection Procedure (See Figure 3)
The procedure for connecting the M3T-FLX-144NSE is shown
below.
(1) Mount the NQPACK144SE on the target board.
(2) Attach the YQPACK144SE on the NQPACK144SE.
(3) Secure the four corners of the YQPACK144SE with the
YQ-GUIDE's.
● Do
not
use
the
YQPACK144SE for fixing the YQPACK144SE.
● The screwdriver included with the NQPACK144SE is
used for fixing the HQPACK144SE. Do not use if for
fixing the YQ-GUIDE's.
(4) Connect the probe of the emulation pod to the
M3T-FLX-144NSE.
(5) Attach the M3T-FLX-144NSE on the YQPACK144SE.
6. External Dimensions and a Sample Foot Pattern
55.0
Figure 4 External dimensions and a sample foot pattern of the M3T-FLX-144NSE
screws
included
with
the
M3T-FLX-144NSE
YQ-GUIDE (x4)
YQPACK144SE
NQPACK144SE
144-pin 0.4-mm-pitch
(144PFB-A) foot pattern
Figure 3 Connection procedure of the M3T-FLX-144NSE
21.8
(3/4)
Probe of emulation pod
(4)
(5)
Be sure to use a
slotted screwdriver.
(3)
(2)
(1)
: No. 1 pin
Be sure to align the pins.
0.225
0.4
15.1
19.1
Unit: mm
Advertisement
