Converter board for connecting flx160 to 64-pin 0.5-mm-pitch lqfp (6 pages)
Summary of Contents for Renesas M3T-FLX-DMY613
Page 1
On April 1 , 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding.
Page 2
Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as “Specific”...
Page 3
CAUTION Renesas Tools Homepage http://www.renesas.com/tools Rev.2.00 Aug. 01, 2007 REJ10J0343-0200 M3T-FLX-DMY613 Converter Board for Connecting M16C/60 Series 80-pin 0.65mm pitch QFP If the requirements shown in the "CAUTION" sentences are ignored, the equipment may cause personal injury or damage to the products.
(see Figure 2) Mount the DUMMY80S to the socket on the target. On top of it, mount the socket frame and M3T-FLX-DMY613 in that order. Then connect the emulation pod to the connector provided at the top of the M3T-FLX-DMY613.
Page 5
• We cannot accept any request for repair. • For inquiries about the product or the contents of this manual, contact your local distributor. Renesas Tools Homepage http://www.renesas.com/tools 8. Correspondence of Connectors J1, J2, J3 and J4 Table 2 lists the correspondence of connectors J1, J2, J3 and J4.