Operation - Bushranger 53AH6IMSP Operator's Manual

• Your handles may be adjusted for your mowing
comfort. Refer to Service and Adjustments section
of this manual (except 2in1 mower).
CAUTION: Wear protective gloves during
CAUTION: Wear protective gloves during
operation of setting up your mower.
operation of setting up your mower.
3. TO ASSEMBLE GRASS CATCHER
3. TO ASSEMBLE GRASS CATCHER
• Put grass catcher frame into grass bag with rigid
• Put grass catcher frame into grass bag with rigid
part of bag on the bottom. Make sure the frame
part of bag on the bottom. Make sure the frame
handle is outside of the bag top.
handle is outside of the bag top.
• Slip vinyl bindings over frame.
• Slip vinyl bindings over frame.
NOTE: If vinyl bindings are too stiff, hold them in warm
NOTE: If vinyl bindings are too stiff, hold them in warm
water for a few minutes. If bags get wet, let it dry before
water for a few minutes. If bags get wet, let it dry before
using.
using.
FRAME
GRASS BAG
GB
GB
GB
These symbols may appear on your lawnmower or in literature supplied with the product. Learn and understand their meaning
These symbols may appear on your lawnmower or in literature supplied with the product. Learn and understand their meaning.
Drive speed control lever
Drive speed control lever
Drive speed control lever
Rear cover
Engine
Height adjustment lever
Height adjustment lever
Muffler
8
DRIVE CONTROL BAR-used to engage power-pro-
pelled forward motion lawn mower.
THROTTLE CONTROL-used for starting the engine
and allows you to select either fast or slow engine
DRIVE CONTROL BAR-used to engage power-pro-
DRIVE CONTROL BAR-used to engage power-pro-
speed.
pelled forward motion lawn mower.
pelled forward motion lawn mower.
STARTER HANDLE-used for starting the engine.
THROTTLE CONTROL-used for starting the engine
THROTTLE CONTROL-used for starting the engine
8
MULCHER PLUG-located at the discharge opening,
and allows you to select either fast or slow engine
and allows you to select either fast or slow engine
must be removed when converting to bagging operation.
speed.
speed.
(For 3in1 mower)
FRAME
PLASTIC EDGE

OPERATION

OPERATION
OPERATION
OPERATION
Zone starter ring
Starter knob
Starter knob
Starter knob
Starter handle
Locking lever
Locking lever
Locking lever
Locking lever
Locking lever
Locking lever
Grass catcher
Grass catcher
Grass catcher
Height adjustment lever Adjuster
Adjuster
Adjuster
Wheel
Chassis
Fig.5
Wheel
Wheel
Fig.5 Fig.5 Chassis Height adjustment lever Height adjustment lever
Chassis
Height adjustment lever Height adjustment lever
Height adjustment lever Height adjustment lever
mowing work.
mowing work.
4. ASSEMBLE ENGINE STARTER ROPE
Fig.3
• Pull the starter handle back to the hook ring on
upper handle. Assemble the rope into the zone
starter ring through the opening of hook ring.
• Always keep starter rope in hook ring during all
mowing work.
WARNING: The safety position for starting the
engine is at the back of upper handle. Users
must keep the rope always in the middle of the hook
ring during starting the engine and mowing work. It
is dangerous to start an engine away from the safety
position, which could lead to serious injury to feet or
bodily parts.
WARNING: The safety position for starting the
engine is at the back of upper handle. Users
must keep the rope always in the middle of the hook
ring during starting the engine and mowing work. It
is dangerous to start an engine away from the safety
position, which could lead to serious injury to feet or
bodily parts.
OPERATION
Upper handle
Upper handle
Upper handle
Engine brake handle/Blade brake handle(Model with BBC)
Engine brake handle/Blade brake handle(Model with BBC)
Engine brake handle/Blade brake handle(Model with BBC)
Throttle and drive controler
Throttle and drive controler
Throttle and drive controler
Rear cover
Rear cover
Rear cover
05
HOW TO USE YOUR LAWN MOWER
ENGINE SPEED
A throttle located on the side of the upper handle
HOW TO USE YOUR LAWN MOWER
HOW TO USE YOUR LAWN MOWER
c o ntr ols th e e ng ine sp ee d . Fa st p os itio n is for
Mower chassis
normal cutting, trimming and better grass bagging.
ENGINE SPEED
ENGINE SPEED
Slow position is for light cutting, trimming and fuel
A throttle located on the side of the upper handle
A throttle located on the side of the upper handle
economy.
co n tro ls th e e n g i n e sp e e d . Fa st p o si ti o n i s for
c ontrols the engine s peed. F as t pos itio n is for
normal cutting, trimming and better grass bagging.
normal cutting, trimming and better grass bagging.
Zone Starter Ring
Hook ring
Starter rope
STARTER ROPE
ZONE STARTER
RING
Upper handle
Drive control lever
Throttle and
Gearshift Controller
Engine
Engine
Engine
Air filter
Upper handle
adjustement lever
Air filter
Air filter
Fuel cap
Grass catcher
Bumper
Bumper
Bumper
Wheel
Air filter
Fig.6
FIG. 3
OPERAT