Jeep GRAND CHEROKEE 2017 User Manual page 310

WARNING!
ALWAYS drive safely with your hands on
the wheel. You have full responsibility and
assume all risks related to the use of the
Uconnect features and applications in this
vehicle. Only use Uconnect when it is safe
to do so. Failure to do so may result in an
accident involving serious injury or death.
CAUTION!
Do NOT attach any object to the touch-
screen, doing so can result in damage to
the screen.
Setting The Time
• Model 8.4 NAV synchronizes time auto-
matically via GPS, so it should not require
any time adjustment. If you do need to set
the time manually, follow the instructions
below for Model 8.4.
• For Model 8.4, turn the unit on, then press
the time display at the top of the screen.
Press "Yes."
308
• If the time is not displayed at the top of
the screen, press the "Settings" button on
the touchscreen. In the Settings screen,
press the "Clock" button on the touch-
screen, then check or uncheck this option.
• Press "+" or "–" next to Set Time Hours
and Set Time Minutes to adjust the time.
• If these features are not available, un-
check the Sync Time box.
• Press "X" to save your settings and exit out
of the Clock Setting screen.
Background Themes
• Screen background themes are selectable
from a pre-loaded list of themes. If you'd
like to set a theme, follow the instructions
below.
• Press the "Settings" button on the touch-
screen.
• Press the "Display" button on the touch-
screen.
• Then press "Set Theme" button on the
touchscreen and select a theme.
Audio Settings
• Press of the "Audio" button on the touch-
screen to activate the Audio settings
screen to adjust Balance\Fade, Equalizer,
and Speed Adjusted Volume.
• You can return to the Radio screen by
pressing the "X" located at the top right.
Balance/Fade
• Press the "Balance/Fade" button on the
touchscreen to Balance audio between the
front speakers or fade the audio between
the rear and front speakers.
• Pressing the "Front," "Rear," "Left," or
"Right" buttons on the touchscreen or
press and drag the Speaker Icon to adjust
the Balance/Fade.
Equalizer
• Press the "Equalizer" button on the touch-
screen to activate the Equalizer screen.
• Press the "+" or "–" buttons on the touch-
screen, or press and drag over the level bar
for each of the equalizer bands. The level
value, which spans between plus or minus
nine, is displayed at the bottom of each of
the Bands.