Advertisement
1. Outline
The M3T-DUMMY80 is an accessory tool product which
connects the emulator probe and target system. Its dimensions
are the same as those of an 80-pin 0.8-mm-pitch QFP (20 x 14
mm) IC package (80P6N-A).
2. Package Components (See Figure 1)
(1)
M3T-DUMMY80 main unit
(2)
Socket main unit
(3)
Socket frame (for 80P6N-A)
(4)
User's manual (This manual)
(5)
User's manual (Japanese)
3. Applicable Sockets
The M3T-DUMMY80 has been tested with the following IC
sockets made by Matsushita Electric Works, Ltd. Be sure to use
them.
Socket main unit + socket frame (1 set):
AXS4803M195C (for 80P6N-A)
Socket frame for repair (200 pieces):
AXS4802M1 (for 80P6N-A)
4. Specifications
Table 1 Specifications
Applicable package
Max. permissible current
Insertion/removal
iterations of connector
Insulation resistance
5. Usage (See Figure 2)
The M3T-DUMMY80 can be used for debugging and onboard
evaluation in common by mounting the socket main unit on the
target board.
(1) For debugging
Mount the socket main unit on the foot pattern of the
target board. And mount the M3T-DUMMY80 and socket
frame on it. Then attach the connector of the emulator.
(2) For onboard evaluation
Mount the socket main unit on the foot pattern of the
target board. Mount an MCU with on-chip flash memory
or one-time PROM on it. Then attach the socket frame on
it.
Before using the M3T-DUMMY80, be sure to read "8.
Precautions" on page 4.
x 1
x 1
x 2
x 1
x 1
80P6N-A, 80P6N-C
(80-pin 0.8-mm-pitch QFP)
200 mA at 5 V
20 times guaranteed
100M Ω or more
(1) M3T-DUMMY80 main unit
(2) Socket main unit
For 80P6N-A, 80P6N-C
(Color: white)
Figure 1 Package components
(1) Debugging
M3T-DUMMY80 main unit
: No. 1 pin
Be sure to align the pins.
(3) Figure 2 Usage of the M3T-DUMMY80
(2/4)
(3) Socket frame
For 80P6N-A
(Color: blue)
(2) Onboard evaluation
Emulator
Socket frame
MCU (QFP)
Socket main unit
Foot pattern
Advertisement
