Advertisement
1. Outline
The M3T-DUMMY64 is an accessory tool product which
connects the probe of an emulation pod and a target system.
Its dimensions are the same as those of 64-pin 0.8-mm-pitch
QFP (14 x 14 mm) IC packages (64P6N-A).
2. Package Components (see Figure 1)
(1) M3T-DUMMY64 main unit .................................. x1
(2) Socket main unit .................................................... x1
(3) Socket frame (for 64P6N-A) .................................. x2
(4) M3T-DUMMY64 User's Manual (This manual)
3. Applicable Sockets
The M3T-DUMMY64 has been tested with the following IC
sockets made by Matsushita Electric Works, Ltd. Be sure to
use them.
Socket main unit + socket frame (1 set):
AXS4643R195C (for 64P6N-A)
Socket frame for repair (200 pieces):
AXS4642R1 (for 64P6N-A)
4. Specifications
Table 1 Specifications
Applicable package
64P6N-A
(64-pin 0.8-mm-pitch QFP)
Max. permissible
200 mA at 5 V
current
Insertion/removal
20 times guaranteed
iterations of connector
100M Ω or more
Insulation resistance
5. Usage (see Figure 2)
The M3T-DUMMY64 can be used for debugging and on-
board evaluation in common by mounting the socket main
unit on the target board.
(1) For debugging
Mount the socket main unit on the foot pattern of the
target board. And mount the M3T-DUMMY64 and the
socket frame on it. Then attach the connector of the
emulator.
(2) For onboard evaluation
Mount the socket main unit on the foot pattern of the target
board. Mount an MCU with on-chip flash memory or one-
time PROM on it. Then attach the socket frame on it.
Before using the M3T-DUMMY64, be sure to read "8. Precau-
tions" on page 4.
(1) M3T-DUMMY64 main unit
(2) Socket main unit
For 64P6N-A
(Color: white)
Figure 1 Package components of the M3T-DUMMY64
(1) Debugging
Socket frame
M3T-DUMMY64 main unit
: No. 1 pin position
Be sure to align the pins.
Figure 2 Usage of the M3T-DUMMY64
( 2 / 4 )
(3) Socket frame
For 64P6N-A
(Color: white)
(2) Onboard evaluation
Emulator
Socket frame
MCU (QFP)
Socket main unit
Foot pattern
Advertisement
