Suplpements - Cessna 150 COMMUTER 1976 Pilot Operating Handbook

SECTION 8
HANDLING, SERVICE
&
MAINTENANCE
CESSNA
MODEL 150M
Blot up any spilled liquid promptly with cleansing tissue or rags .
Don't pat the spot; press the blotting material firmly and hold it for sev-
eral seconds. Continue blotting until no more liquid is taken up. Scrape
off stickly materials with a dull knife, then spot-clean the area.
Oily spots may be cleaned with household spot removers, used spar-
ingly. Before using any solvent, read the instructions on the container
and test it on an obscure place on the fabric to be cleaned. Never satu-
rate the fabric with a volatile solvent; it may damage the padding and
backing materials.
Soiled upholster y and carpet may be cleaned with foam-type detergent,
used according to the manufacturer's instructions. To minimize wetting
the fabric, keep the foam as dryas possible and remove
it
with a vacuum
cleaner.
The plastic trim, headliner, 'instrument panel and control knobs need
only be wiped off with a damp cloth. Oil and grease on the control wheel
and control knobs can be removed with a cloth moistened with Stoddard
solvent. Volatile solvents, such as mentioned in paragraphs on care of
the windshield, must be never be used since they soften and craze the
plastic.
8-14
CESSNA
MODEL 150M
SECTION 9
SUPPLEM ENTS
SECTION 9
SUPPLEMENTS
(Optional Systems Description
&
Operating Procedures )
TABLE O F CONTEN TS
Introduction
Su pple men ts :
Emergency Locator Transmitter (ELT) .
Cessna 300 Transceiver (T ype RT- 524A )
Cessna 300 Nav/Com (T ype RT- 308C)
Cessna 300 Nav/Com (Type RT -5 28E-l)
Cessna 300 Nav/Com (Type RT -328T)
Cessna 300 ADF (Type R-546E) . . . .
Cessna 300 Transponder (Type RT-359A) and Optional
Altitude Encoder (Type EA-401A)
Cessna 400 Marker Beacon (Type R-402A ) . . . . .
(4 pages)
(4 pages)
(4 pages)
(6 pages)
(6 pages)
(6 pages)
(6 pages)
(4 pages)
9-1