Front Cover - Sony Ericsson k660i Working Instruction, Mechanical

Working Instruction, Mechanical

4.1.4 Front Cover

C &
LEAN ANY DUST OR MARKS FROM FRONT COVER WINDOW
LCD !
BEFORE PROCEEDING WITH NEXT STEP
Position Main Frame Assembly into Front Cover as shown
in picture.
Press down on Main Frame Assembly to secure into the
Front Cover at bottom of the phone with fingers as shown in
picture.
Press down on Main Frame Assembly to secure into the
Front Cover Assembly at top end using fingers.
T
IGHTEN THE SCREWS ACCORDING TO THE SCREWING
!
SEQUENCE SHOWN BY THE NUMBERS IN THE PICTURE
Use torx bit no.6 to tighten the 4 Screws PT1.7 x 5mm.
Use Torque pressure 20NCM +/-1NCM.
1208-5073 Rev 1 47(51)
©
Sony Ericsson Mobile Communications AB