Antenna Cover Assy & Back Cover Assembly - Sony Ericsson k660i Working Instruction, Mechanical

4.1.5 Antenna Cover Assy & Back Cover Assembly
1. Place Antenna Cover Assy & Back Cover Assembly
into top position first.
2. Lower Antenna Cover Assy & Back Cover Assembly
into position as shown in picture.
Press down the bottom end of phone to secure snap hooks
as shown in picture.
Press down the top end of phone to secure snap hooks as
shown in picture.
T
IGHTEN THE SCREWS ACCORDING TO THE SCREWING
SEQUENCE SHOWN BY THE NUMBERS IN THE PICTURE
Use 10Ncm +/- 2Ncm torque pressure to tighten all 3
screws PT1.4x4mm using Philips bit.
1208-5073 Rev 1
©
Sony Ericsson Mobile Communications AB
Working Instruction, Mechanical
!
48(51)