Inserting Cable Head - Renesas H8S/2646 Series User Manual

4 projections to apply
epoxy resin adhesive to
Bottom view of IC soket
2. Solder the IC socket for a FP-144 package to the user system.
Be sure to completely solder the leads so that the solder
slops gently over the leads and forms solder fillets. (Use
slightly more solder than the MCU.)
2.2.2

Inserting Cable Head

Check the location of pin 1 before inserting.
Align pin 1 on the IC socket for a FP-144 system interface cable head into the IC socket on the user
system, as shown in figure 4.
6
User system
Figure 3 Location Setting of IC Socket
CAUTION
CAUTION
Guide pins
Pin 1
IC socket
(NQPACK144SD manufactured
by Tokyo Eletech Corporation)