Product Description connector. “theMOOD” is a gas appliance made of Corten Close the gas tap or pressure regulator ● steel with a single-walled flue pipe of Ø...
Installation requirements The fireplace should be installed in accordance with these installation instructions and applicable national and local Installation of theMOOD regulations. Mount the fireplace leveled on a flat solid surface. At an initial commissioning of a new...
Page 10
(see fig. 1.6) repeat this if the exhaust pipe comes loose. the batteries. Insert the metal cable relief. (see fig. For TheMOOD a maximum flue length of ● ● 3.4) 1.5 m applies, if the exhaust pipe can be...
card) Start the fireplace as described in ● 10 Annual maintenance Chapter 8.1. Assess whether the flame-distribution is good. 10.1 Check: Position the glass and check the fire ● In case of build-in, for service and image. maintenance the two-piece gas tap or flat coupling and electric cables are accessible User Instruction through the service hatch in the fireplace.
11 Technical specifications Gas category II2H3P II2H3+ II2H3P Appliance type A1 (outdoor) A1 (outdoor) A1 (outdoor) Reference gas Load Hi 12.4 12.4 12.4 Inlet pressure mbar Gas flow rate at full load 1,303 0,374 0,496 (At 15°C and 1013 mbar) gr/h Burner pressure at full load mbar...
Need help?
Do you have a question about the theMOOD and is the answer not in the manual?
Questions and answers