Entering Setup - Protech Systems PA-8225 User Manual

Chapter 3 Software

3-4-2. Entering Setup

When the system is powered on, the BIOS will enter the Power-On Self Test (POST)
routines and the following message will appear on the lower screen:
POST Screen
As long as this message is present on the screen you may press the <Del> key (the
one that shares the decimal point at the bottom of the number keypad) to access the
Setup program. In a moment, the main menu of the Aptio Setup Utility will appear on
the screen:
'
Page: 3-95
PA-8225 SERIES USER S MANUAL