Mechanical Characteristics; Cosmetic; Mechanical Data Files; Location Of Philips Logo - Philips 160EL1SB/00 Service Manual

5

Mechanical characteristics

5.1

Cosmetic -

Philips ID
5.2

Mechanical data files -

ProE files required
5.3

Location of Philips logo -

Per Philips make-up sheet
5.4

Gap between panel and front bezel

<1.4mm(Max.)
5.5

Location of Control icons -

Per Philips Graphic sheet
5.6

Color for resin/paint -

Per Philips make-up sheet
5.7

Fire enclosure request-

Shielding Cover should fulfill international standard (new)
5.8

Resins

RoHS required
WEEE required.
Resin type/selection refer to Project Book Section 7.2 Plastic material.
5.9

If paint is used

RoHS required
WEEE require
If new painting type need to implement, refer to UN-D 1235.
5.10

Plastic mold tooling

Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush,
weld lines, gate marks, ejector marks, etc.). Refer to "TYV61-90007".
Painting to cover up cosmetic defects due to molding is strongly discouraged.
China RoHS mark requested.
5.11

Plastics flammability

All Plastics to be Flame Retardant UL 94-HB.
Base / Rear to be Flame Retardant UL 94-HB.
1.0

Rev :

2008/12/31
Date :
ph il ips
160E1
Type :
PHILIPS
Brand :
15.6" Wide LCD Monitor
12 of 20
Page :