Philips 160EL1SB/00 Service Manual page 56

56 Meridian 1
Philips160EL1.DDCI
Philips160EL1.DDCI
2. Color Temp confirmation
Connect the signal to the monitor, the monitor displays white-picture, use CA210 to measure the Color Temp of the
screen center and select the OSD to make sure whether the Color Temps accord with the SPEC.
3. The way to enter the factory mode:
Firstly, DC power "Off", when press "AUTO" and "MENU" key, DC power "On", then press "MENU" again.
The factory menu will appear on the left top of screen.
Remark: You can select "Input" - "Factory" to further check the factory menu.