5.13
Tilt and swivel base
Tilt angle
Tilt for left and right:
A-B
Black side and cut side
L
Gap between bezel and rear cover
data.
Step between bezel and rear cover
Left ,right and top : 0.3mm
"Wobble", "Twist", etc (front to back or side to side)
Whole monitor set shall retain stability within a short time after the applied external force
disapear.
20NT , 6secs Max.
5.14
Kennsington Lock
Must meet Kensington_slot.spec "TYE-M0004".
MMD request metal plate in Kinsington hole.
5.15
Label
Carton label should follow Philips requirement.
Regulatory label follow Philips requirement.
China RoHS label
Detail document refer to Philips Engineering Reference Book.
5.16
Product dimension / Weight (Refer to Philips approved SHT 191/SHT560)
Unit dimension : 376(w)*303(H)*156(D)
1.0
Rev :
2008/12/31
Date :
ph il ips
:
-5 +2/- 0 (forward)
+20 +0/- 2 (backward)
3.0MM
U
D
back to stable.
160E1
Type
:
PHILIPS
Brand :
A
R
2. Black side on the left and right is
symmetrical
0.2 mm(Typ.) Max. will wait for 1
Bottom and corner:
0.5mm
15.6" Wide LCD Monitor
Page :
B
1. Visual area
H
L-R
0.8~1.0
V
U-D
0.8~1.0
not cut side.
st
lot of MP to correct the
14 of 20