Alignment And Adjustmens; Control Panel - Samsung CLX-3160FN Service Manual

6
6
6. Alignment and Adjustments
This chapter describes some of the main service procedures including:
Using the Tech mode; Clearing paper jam and test patterns.
Much of this chapter is also included in the user's guide.

6.1 Control Panel

6.1.1 CLX-3160FN
1 Speed buttons: Allows you to store frequently-
dialed fax numbers and enter them with the touch
of a few buttons.
2 Shift: Allows you to shift the speed buttons to
access numbers 16 through 30.
3 Phone Book: Allows you to store frequently used
fax numbers in memory or search for stored fax
numbers. Also allows you to print an Phone Book list.
4 Resolution: Adjusts the document resolution for
the current fax job.
5 Redial/Pause: In Standby mode, redials the last
number, or in Edit mode, inserts a pause into a fax
number.
6 Fax: Activates Fax mode.
7 Copy: Activates Copy mode.
8 Scan: Activates Scan mode.
9 Display: Shows the current status and prompts
during an operation.
10 Menu: Enters Menu mode and scrolls through the
available menus.
11 Scroll buttons: Scroll through the options
available in the selected menu, and increase or
decrease values.
Samsung Electronics
12 OK: Confirms the selection on the screen.
13 Back: Sends you back to the upper menu level.
14 Status: Shows the status of your machine.
15 Darkness: Adjusts the document brightness for
the current copy job.
16 Original Type: Selects the document type for the
current copy job.
17 Reduce/Enlarge: Makes a copy smaller or larger
than the original.
18 USB Print: Allows you to directly print files stored
on a USB Memory device when it is inserted into
the USB memory port on the front of your
machine.
19 Number keypad: dials a number or enters
alphanumeric characters.
20 On Hook Dial: Engages the telephone line.
21 Stop/Clear: Stops an operation at any time. In
Standby mode, clears/cancels the copy options,
such as the darkness, the document type setting,
the copy size, and the number of copies.
22 Color Start: Starts a job in Color mode.
23 Black Start: Starts a job in Black and White mode.

Alignment and Adjustmens

Service Manual
6-1