Table of Contents
Advertisement
G. REMOVING ADVANCE BAR
1.
Using a 3mm hex wrench, loosen screws on cover and remove.
2.
Remove advance pin with hammer and punch.
3.
Remove advance bar and spring.
Screws
Cover
Advance Pin
H. REMOVING BAFFLE ASSEMBLY
1.
Loosen and remove baffle assembly and o-ring.
I. REMOVING OUTER LINER ASSEMBLY FROM HOUSING
1.
Grasp outer liner assembly and firmly pull from housing.
Outer Liner Assembly
WARNING: Always unload a powder actuated tool before disassembling,
replacing barrel, cleaning, or assembling.
A. INSERTING OUTER LINER ASSEMBLY
1.
Firmly push outer liner assembly into housing (see Figure 14).
Outer Liner Assembly
106763
Figure 11 - Removing Advance Bar
Housing Handle
Baffle Assembly
Figure 12 - Removing Baffle
Figure 13 - Removing Outer Liner Assembly
Housing
Figure 14 - Inserting Outer Liner Assembly
Advance Bar and Spring
Housing
O-Ring
Tool Assembly
21
Housing
Continued
Advertisement
Table of Contents
