Accessories; Tool Disassembly And Assembly - Remington 482 Operating Instructions Manual

PART NO.
056415
056485
056486
103754
102621
103752
For parts and accessories, please contact your dealer or distributor. If they are unable to satisfy
your requirements, please contact DESA International at the locations as stated on back page.

Tool Disassembly and Assembly

WARNING: Always unload a powder actuated tool before disassembling,
!
replacing barrel, cleaning, or assembling.
WARNING ICON G 001
DISASSEMBLY
1. a.) Remove tang cap (1), compression
spring (2) and tang (3). If tang does not
drop out, thread 1/4-20 screw into tang
and pull out. Slide barrel assembly
from receiver (4).
Barrel Assembly
3
2
1
b.) Remove muzzle cap (5) from barrel
(6) by unscrewing counterclockwise.
5
c.) Insert a rod or screwdriver into bar-
rel chamber (6) and push piston (7)
and buffer (8) out.
8
7
106088
DESCRIPTION
Goggles
Brush, 1/4 in.
Brush, 5/8 in.
Hex Wrench, 3/16 in.
Accessory Muzzle Cap (for 3" pin)/Spall Shield Kit
Hex wrench, 1/8 in.
4
6
6
2. Remove screw (9) in front of trigger
guard. Remove upper screw (10) from
recoil pad (11). Slide receiver (4) from
handle housing (12). Remove firing pin
(13) and firing pin spring (14). Remove
the recoil pad by removing the lower
pad screw (15).
4
3. Replace barrel in receiver, align barrel
with ejector (16) and push breech (17)
to the rear. Remove set screw (18)
from breech. Turn and align firing pin
sear (19) with sear access hole. Re-
482-93
move sear and sear spring (20) from
breech Slide barrel and breech from
receiver.
17
16
19

Accessories

12
14
13
9
11
10
15
18
20
19
Continued