Features; Specifications - sauter TC 1250-0.1 F Instruction Manual

This coating thickness gauge is small in size, light in weight and easy to carry. Al-
though it is complex and advanced, it is convenient to operate. Its ruggedness will
allow many years of use if all the instructions are followed carefully.
Please keep this instruction manual always within reach!
Annotation: It is strongly recommended to adjust the new instrument before
the first use, as described in paragraph 5. By doing this, you will achieve a
much better measurement result right from the start.

1 Features

» This instrument meets the standards of both, ISO 2360 and DIN as well as ASTM
and BS. It is suitable for the laboratory and for use under "harsh field" conditions.
» The F- sensor measures the thickness of non-magnetic coatings, e.g. paint, plas-
tics, enameled porcelain, galvanic coatings, phosphorescent layers chrome, lacquer
layers, copper plates, aluminum plates, alloys, paper etc.
These layers are located on magnetic metals, e.g. steel, iron, nickel etc.
» The N- sensor measures the thickness of non-magnetic coatings on non-magnetic
metals. It is used on anodizing, varnish, paint, enamel, plastic coatings, powder etc.
It can be applied on non-magnetic materials like aluminium, brass, stainless steel etc.
»The N- sensor measures the thickness of non-magnetic coatings on non-magnetic
metals. It is used on anodization, varnish, paint, enamel, plastic coatings, powder
coatings etc. These can be applied on non-magnetic materials like aluminium, brass,
non-magnetic stainless steel and others.
»Die FN-sensor is a combination of both sensors and this way, it is applicable for
both application ranges.
» automatic base material recognition.
» manual or automatic Auto-Power off to conserve batteries
» metric /imperial conversion from µm / mil
»Two measurement modes: single and continuous (S= single/ C= continuous)
» Large measurement range and high resolution
» Data transfer to PC possible by RS232 interface
Cable and software can be obtained as optional accessory ATC-01.

2 Specifications

Display: 4 digits, 10mm LCD
Measurement range: 0- 1250 µm/ 0- 50 mil (default)
TC-BA-e-1712 3