Monoprice 30994 User Manual page 10

5. Click the gears icon in the upper left corner, then ensure that the Configured
Displays value is set to 2560 x 1440.
6. Close the software, then restart it. The software will remember the settings you
saved, so you don't have to configure it each time.
7. Load a model, then save it with a .CWS file extension on your desktop or any folder.
This will be the directory that the sliced model file will be saved to.
8. Click the Slice button. The software will slice the model file and save it to the
directory where the original model file is located. Depending on the size of the
model and resolution, it can take some time to slice the model.
10