Download
Share
Print this page
Kusam-meco KM-CAL-700 User Manual
  1. Manuals
  2. Brands
  3. Kusam-meco Manuals
  4. Measuring Instruments
  5. KM-CAL-700
  6. User manual

Kusam-meco KM-CAL-700 User Manual

Volt / ma calibrator
Hide thumbs

Advertisement

Quick Links

Download this manual
An ISO 9001:2008 Company
Volt / mA Calibrator is a source and measurement tool. This calibrator is use
to measure or output 0 to 24 mA DC Current loop, & 0 to 20V DC Voltage.
But the calibrator cannot be used to measurement and source simultaneously.
GENERAL SPECIFICATIONS :
DC Voltage input and output : 0-100.00mV / 20.000V± (0.02% + 3)
DC Current input and output: 24.000mA ± (0.015% + 3)
Loop Power output : 24V ± 10%
Input impedance : 2Megohm.
Over Voltage protection : 30V
Voltage driver capability : 1mA
5 digit LCD dual display
LCD size : 64 x 42mm
Operating Temperature : -10°C ~ 55°C
Storage Temperature : -40°C ~ 60°C
Operating altitude : 3000 meters maximum
Temperature Coefficient : ± 0.005% of range per °C for the
temperature range -10°C to 18°C & 28°C to 55°C
Relative Humidity : 95% upto 30°C, 75% upto 40°C, 45% upto 50°C, 35% upto 55°C.
Shock : Random 2g, 5Hz to 500Hz
Fuse : 125mA / 250V fast acting fuse
Power Supply : 1.5V AAA x 6 batteries.
External power optional
Dimension : 204(L) x 99(W) x 46(H)mm
Weight : Approx. 460g. (including battery)
ACCESSORIES :
Double insulation Test Leads , 2 Crocodile Clips, DC 1.5V (AAA) Battery x 6, Carrying Case, User's Manual.
Measurement & Output Voltage Parameter
Function
DCV mV Input
DCV mV Output
Loop Power Output
®
An ISO 9001:2008 Company
Chhaya Computer/D:/Chhaya/Coreldraw Files/New catlogs Dec 2011/KM-CAL-700.cdr
®
VOLT / mA CALIBRATOR
ELECTRICAL SPECIFICATIONS : KM-CAL-700
Range
Resolution
0 ~ 100mV
0.01mV
0 ~ 20 V
0.001V
0 ~ 100mV
0.01mV
0 ~ 20 V
0.001V
24 V DC
N / A
G-17, Bharat Industrial Estate, T. J. Road, Sewree (W), Mumbai - 400 015. INDIA.
Sales Direct : 022 - 24156638.
Email : kusam_meco@vsnl.net,
SOURCE & MEASURES
Mode KM-CAL-700
Measurement & Output mA Parameter
Function
DC mA Input
DC mA Output
Note: All Specification are Subject to change without prior notice.
Tel.: 022 -2 4124540, 24181649
Website : www.kusamelectrical.com
Preliminary Data
Range
Resolution
0 ~ 24 mA
0.001 mA
0 ~ 24 mA
0.001 mA
Fax : 022 - 24149659

Advertisement

loading
Need help?

Need help?

Do you have a question about the KM-CAL-700 and is the answer not in the manual?

Questions and answers

Related Manuals for Kusam-meco KM-CAL-700

Summary of Contents for Kusam-meco KM-CAL-700

  • Page 1 G-17, Bharat Industrial Estate, T. J. Road, Sewree (W), Mumbai - 400 015. INDIA. Sales Direct : 022 - 24156638. Tel.: 022 -2 4124540, 24181649 Fax : 022 - 24149659 An ISO 9001:2008 Company Email : kusam_meco@vsnl.net, Website : www.kusamelectrical.com Chhaya Computer/D:/Chhaya/Coreldraw Files/New catlogs Dec 2011/KM-CAL-700.cdr...
  • Page 2 * Solar Power Meter * EMF/ELF Detector / RF Field Strength Meter OPERATION 17, Bharat Industrial Estate, T. J. Road, Sewree (W), Mumbai-400015. INDIA MANUAL Sales Direct: 24156638 Tel.: (022)2412 4540, 2418 1649 Fax: 2414 9659 E-mail : kusam_meco@vsnl.net, Website : www.kusamelectrical.com, www.kusam-meco.co.in...

  • Page 3: Table Of Contents

    This warranty does not apply for damaged Ic’s, Burn't PCB's, 5) Explanation on Front Panel......fuses, disposable batteries, carrying case, electrodes probes, cables or to any product which in “KUSAM-MECO’s” opinion, has 6) Understanding Display Screen....... been misused, altered, neglected, contaminated or damaged by accident or abnormal conditions of operation or handling.

  • Page 4: Safety Information

    0 to 24 mA DC current loop, and 0 to 20 V DC voltage. But the calibrator cannot be used for ISO 9001 measurement and source simultaneously. KUSAM-MECO REGISTERED Volt/mA Calibrator include this accessories: PASS Holster, a pair of Test Leads, AAA*6 battery, and...
  • Page 5 If the Calibrator is broken or short of some accessories, 7) Do not use the AC power adapter in a high please contact the supplier. Please contact the temperature or wet place. distributor about other accessory's information. 8) Please make the AC power adapter avoid a strong bump.
  • Page 6 Specification Specification are based on a one year calibration cycle and apply from +18 °C to +28 °C unless stated otherwise. "Counts" means number of DC power AC power DC power Plug Cord Socket increment or decrements of the least significant AC-DC Converter.

  • Page 7: General Specification

    Display all symbol General Specifications : Setting display all symbol: = Maximum voltage applied between any jack and earth ground or between any two jack : 1) Keep press 6 V / mV conversion key, then turn on the power. 2) It will display all symbols on LCD.

  • Page 8: Explanation On Front Panel

    Explanation on Front Panel The front panel is shown as in figure: INPUT OUTPUT 24. 0 00 1) Loop power 24V to ground 2) mA measurement input jack POWER Voltage / current CALIBRATOR 3) Input or output negative (ground) jack INPUT OUTPUT 4) V, mV input or...

  • Page 9: Operation Instruments

    13) Input state indication 14) Output state indication INPUT OUTPUT 15) Indicating AUTO POWER ON. 24. 0 00 16) Result value 17) Indication to the calibration mode POWER Voltage / current CALIBRATOR 18) Low power indication 19) Current mA / mA% indication INPUT 20) Voltage V / mV indication OUTPUT...
  • Page 10 INPUT OUTPUT INPUT 24. 0 00 OUTPUT 1 0 .000 POWER Voltage / current CALIBRATOR POWER Voltage / current CALIBRATOR INPUT OUTPUT INPUT OUTPUT INPUT +LOOP INPUT +LOOP -VOLTS+ -mA+ SIMULATE +mA- OUTPUT (30V MAX) -VOLTS+ -mA+ SIMULATE +mA- OUTPUT (30V MAX) Circuit under test DC mA output...
  • Page 11 INPUT INPUT OUTPUT 1 0 .000 OUTPUT 24. 0 00 POWER Voltage / current CALIBRATOR POWER Voltage / current CALIBRATOR INPUT INPUT OUTPUT OUTPUT INPUT +LOOP INPUT +LOOP -VOLTS+ -mA+ SIMULATE -VOLTS+ +mA- -mA+ OUTPUT (30V MAX) SIMULATE +mA- OUTPUT (30V MAX) DC mA measurement Calibrator supply Loop power function.