Kleen Sweep 35W - How It Works; First Operation; Assembly; Installing / Servicing The Batteries - Minuteman Kleen Sweep 35W Instruction Manual

Kleen Sweep 35W – How it Works
The side broom is going to collect dirt out of corners & niches and carries it into the track of the main
broom. Fine dust involved is extracted by a suction fan and held back by a filter. Dust-free only air will
exit the machine.

First Operation

Assembly

To reduce the box volume the handlebar is folded forward and the side broom is packed unassembled.
Assemble these items as follows:
• Unfold the handlebar and secure on both sides with the enclosed hex nuts and washers.
Connect the protective caps.
• Tilt machine back until resting on the handlebar. Attach side broom with bolt. Bolt should be
torque tightened snugly only to avoid damage to the broom hub.
Parts and Instruction Manual

Installing / Servicing the Batteries

Open the hood
• Pull the key
• Open the hood lock (1) at the front side with a
screw-driver
– Slot horizontal = close
– Slot vertical = open
• Tilt the hood upwards
Page 3