Ul listed eight 8 channel passive utp transceiver hub with integral camera power, includes eight 8 ul listed accessory hubwayav/hubwaydv video balun/combiners
Passive UTP Transceiver Hub with Integral Camera Power Installation Guide Models Include: HubWay8CDS - UL Listed eight (8) Channel Passive UTP Transceiver Hub with Integral Camera Power HubWay82CDS - UL Listed eight (8) Channel Passive UTP Transceiver Hub with Integral Camera Power...
Page 2
4 cameras over a single CAT-5 or higher structured cable back to the HubWay8CDS. In addition, the HubSat unit provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.
Plug the RJ45 connector at one end of the structured cable into the RJ45 jack marked [Channel 1] of the HubWay8CDS (Fig. 1g, pg. 4). Plug the RJ45 connector at the opposite end of the structured cable into the RJ45 jack of the Video Balun/Combiner located at camera 1.
Page 7
(servicing) instructions in the literature accompanying the appliance. CAUTION: To reduce the risk of electric shock do not open enclosure. There are no user serviceable parts inside. Refer servicing to qualified service personnel. HubWay8CDS - 7 -...
Four (4) rubber pads. Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 website: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A. MEMBER IIHubWay8CDS...
Need help?
Do you have a question about the HubWay8CDS and is the answer not in the manual?
Questions and answers