Fan Replacement - Regency F33 Owners & Installation Manual

FAN REPLACEMENT

For Leg Unit: Remove 7 screws, remove bottom access panel and
replace fan assembly.
1) Disconnect power to fan.
2) Open pedestal door and remove door cover plate by removing 4
screws. See diagram 1.
3) Remove valve cover plate by removing 2 screws.
4) Disconnect the molex plug (from inside the stove).
Note: The #8 ground lug is a dedicated ground for mobile
home use only.
5) Loosen the four 8-32 x 1/2 screws provided into the nutserts
as shown in diagram 3. NOTE: Make sure the fan is supported
as it may fall when the 4 screws are loosened.
Wiring Diagram
Regency ® F33-3 Freestanding Gas Stove
Diagram 1
6) Disconnect the 2 ground wires (green and yellow/green striped)
to the ground lug as per diagram 2.
Note: The #8 ground lug is a dedicated ground for mobile
home use only.
MAINTENANCE
Diagram 2: Ground Lug
Diagram 3
View from back of stove
Strain relief
grommet
Placement of Decal
"Warning 240 Volts
Turn Off Power"
19