ResMed Swift FX Nano Fittings Manual

Fitting Guide
1 2
• Ensure bottom of cushion opening • Adjust the top strap first by pulling
aligns with the bottom of your nose the strap through the buckle, one
then place the mask over your nose. notch at a time, until the mask is
comfortably over your nose.
• Then pull headgear over your head so
it sits midway between ears and eyes. • Do not overtighten.
4 5
• Ensure mask is comfortably sealed. • Adjust the nasal cushion until it sits
comfortably on your nose.
• Connect the free end of the short
tube assembly to the air tubing of
your device, then turn it on.
Optional Soft Wraps
ResMed Ltd Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA.
1 Elizabeth Macarthur Drive
OX14 4RW UK. See www.resmed.com for other ResMed locations worldwide. Swift, SoftEdge and Spring Air Technology are trademarks of ResMed Ltd and are
Bella Vista NSW 2153 Australia
registered in the U.S. Patent and Trademark Office. © 2013 ResMed Ltd. Specifications may change without notice. 1016418/1 2013-06
Global leaders in sleep and respiratory medicine
3
• The back strap should sit just above
the ears at the back of the head.
• Adjust both fasteners on the fabric
back strap at the same time.
• Ensure back strap sits over your hair.
6
• Check for leak and adjust if needed.
If any air is leaking out then readjust
the back strap before readjusting
the top strap.
• Your mask is now ready to use.
• T he soft wraps should be
• W rap each of the soft wraps
around either side of the positioned on your cheeks,
with the fasteners on
headgear, folding the top
the outside.
fastener over the lower one.
For more details, refer to the Swift FX Nano
or Swift FX Nano for Her User Guide.
ResMed (UK) Ltd 96 Jubilee Ave, Milton Park Abingdon Oxfordshire
www.resmed.com
Small in size
BIG ON
COMFORT
Introducing Swift FX Nano, the new compact
nasal mask your patients have been waiting for.
Swift FX Nano
TM
NASAL MASK
Swift FX Nano for Her
TM
NASAL MASK