ORiNG ISC-1112 Quick Installation Manual

ORing Industrial Networking Corp.
Serial
Media
Q I
Converter uick nstallation

Introduction

ISC Series are industrial media converters provide media conversion for RS-232
and RS-422/485 interfaces. ISC Series are ABS housing design and supporting an
operating temperature of - 10°C to 70°C . ISC Series (-I Model)
provide 3000 VDC of isolation to protect the host computer loops and destructive
voltage spikes. Internal high-speed transient suppressors on each data line protect
the modules from dangerous voltages levels or spikes. Therefore, the
reliable media converter and can satisfy most demand of operating environment.
The ISC-1212-I RS-422/485 repeater boosts the RS-422/485 signals to extend the
reach distance up to 4000 ft (1200m) and increase the maximum number of connected
nodes up to 128. With a special circuitry, ISC-1212-I
the data flow and switch the direction of the data lines accordingly. "Auto baud rate
detector" enables ISC-1212-I to automatically configure RS-422/485 signals to any
baud rate without external switch setting.
The ISC-1210U-I/ISC-1310U-I converter is an intelligent, stackable expansion
module that connects to PC USB port or USB Hub via the Universal Serial Bus(USB)
port, providing one High-Speed RS-232/RS-422 or RS-485 serial port(jumperless).
The ISC-1210U-I/ISC-1310U-I feature easy connectivity for serial devices. The RS-
232 standard supports full-duplex communication and handshaking signals (such as
RTS, CTS) and The RS-485 control is completely transparent to the user and software
written for half-duplex COM works without any modification. The
1310U-I
module derives the power from USB port and doesn't need any aid of external
power adapter.
Features
Auto switching baud rate from 300 ~ 115200 bps
Wide operating temperature range from -10°C to 70°C
Provide 3000 VDC isolation protection by -I model
Automatic internal RS-422/485 bus supervision
Reach distance up to 4000 feet (1200 m) for RS-422/485 interface
RS-232/RS-422 support RTS/CTS handshake signals ( -U Model only )
Auto detect and switching for USB to RS-232/422/485 ( ISC-1310U-I )
Power requirement: +9 to +30 VDC
ABS with captive mounting hardware design
Mounts easily on DIN-rail or panel
ORing Industrial Networking Corp.
Copyright© 2009 ORing
All rights reserved.
TEL: +886-2-2918-3036 Website: www.oring-networking.com
FAX: +886-2-2918-3084 E-mail: support@oring-networking.com
Q I G
ISC Series
G
uide

Specifications

ORing Media Converter
Model
Opto-isolations
Physical Ports
USB V1.1 port (B-Type)
ISC Series is
DB9 Connector (Female)
10-pin Terminal Block
is able to automatically detect
Baud Rate
Data bit
Stop bit
Parity
ISC-1210U-I/ISC-
Flow Control
Signal
LED indicator
Power Indicator LED indicators
TxD Indicator
RxD Indicator
Power
Input power
Power consumption(Typ.)
Protection
Isolation
Drive Support
O.S.
Physical Characteristic
Enclosure
Dimension (W x D x H)
Weight (g)
Environmental
Storage Temperature
Operating Temperature
Operating Humidity
Regulatory approvals
EMI
EMS
Shock
Free Fall
Vibration
Warranty
ISC Series
ISC-1112 ISC-1112-I ISC-1212-I ISC-1210U-I ISC-1310U-I
- - - 1
1 1 - -
1 1 2 1
300 ~ 115.2 Kbps
5, 6, 7, 8
1, 1.5, 2
None, Even, Odd, Space, Mark
XON / XOFF (software) XON / XOFF (software)
Auto Hardware Director Contro for RS-485 RTS / CTS (Hardware)
Interface Auto Hardware Director Contro for RS-485 Interface
RS-232: TxD, RxD, GND RS-232: - RS-232: - RS-232: TX, RX, RTS, CTS, GND
RS-422: TxD+, TxD-, RxD+, RxD- RS-422: TX+, TX-, RX+, RX- RS-422: TX+, TX-, RX+, RX-,
RTS+, RTS-, CTS+,
CTS-, GND
RS-485: Data+, Data-, GND
Green: Power LED x1
Green LED x1
Red LED x1
+9~30 VDC power inputs in 10-pin USB bus power (self power)
terminal block
2.2 Watts 0.7 Watts 0.65 Watts
-
3000 VDC
Windows 95/98/ME/2000/XP, Linux
ABS
71.2 (W) mm x 25.3 (D) mm x 100.6 (H) mm (2.8x1x3.96 inch)
110 g 112 g 128 g 114 g
-25 to 85 C (-13 to 185 F) o o
o o
-10 to 70 C (14 to 158 F)
5% to 95% Non-condensing
FCC Part 15, CISPR (EN55022) class A
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8,
EN61000-4-11
IEC60068-2-27
IEC60068-2-32
IEC60068-2-6
2 years
PRINTED ON RECYCLED PAPER
Industrial Serial Media Converter

Installation

DIN-Rail Install Step

DIN-Rail Install Step
1
-
1
P o
w e
r
R x
T x
GND

Wall-mounted Install Step

110 g
P o
w e
r
R x
T x
Version 1.1
Quick Installation Guide