Table of Contents
Advertisement
6.2 Channel setup
6.2.3 Picture control:
For an exact overlay of the defined area the picture of the corresponding channel has
to be displayed. You can receive a single picture from the connected sensor.
Furthermore you can get a continuous live stream of up to 6-7 pictures / second, in or-
der to control the analysis of the sensor. Different display functions of the internal sen-
sor information are available and are descript on chapter 6.2.4 .
Load current single picture:
The old picture display will be overwritten by a new picture.
Start picture stream:
The displaying of current live pictures will be started.
Notes: For changing of parameter settings it is recommend to stop the picture stream
first.
Pause picture stream
The displaying of picture stream will be paused.
Stop picture stream
The continuous picture stream will be stopped, in the editor field remains the last re-
ceived picture.
Change the compression rate of the transmitted picture. To enhance the picture rate
while connected to the DMD over DSL, it´s recommended enhancing the picture com-
pression.
6.2.4 Info bar:
By viewing the picture stream there are some tools to inform the installer about the in-
ternal effect of the DMD:
Show / Hide picture info:
Displays information about size, date in the left, upper side of the picture.
Show recognized objects
The sensor will mark objects, who correspond to the defined object size, as a green
frame, additional with a motion vector. In case of an alarm the state will be displayed
above of the frame.
Show all activated cells:
Alterations in the camera picture are visible foe each individual cells. The sensor will
mark the cells as orange points.
- 21 -
Compression
Advertisement
Table of Contents
