Table of Contents
Advertisement
6.2 Channel setup
6.2 Channel setup
Editor
Info bar
Picture control
6.2.1 Switchbar:
Channel switch:
Switches between setup setting of camera 1...4.
Timezone:
The timezone to be configured is selected with this button.
Area switch: To be able to distinguish the sensor areas from each other via
pull-down menu:
In the example shown above, the setup parameters refer to sensor area 1
of camera channel 1.
Detail-Setup:
By activating an overview of all channel parameters will be displayed (see
description on page 25).
Switchbar
= Mainalarm area
= Prealarm-area 1
= Prealarm-area 2
= Prealarm-area 3
- 19 -
Area parameters
Advertisement
Table of Contents
