Table of Contents
Advertisement
6.1. Menu
Data transmission Sensor PC:
Opens a window for controlling the data transfer from DMD-4 to the PC.
Open Channel Setup:
Opens in the viewing window below for setting all basic parameters of the channels
(see page19).
Open Channel-preview:
Opens a quad-view for all 4 channels, who are refreshed sequencial with the live pic-
tures. By mouse-clicking to one of the windows you can call up directly the regarding
Channel-Setup.
Time zone definition:
Each channel of the DMD-4 is equipped with a total of four time zones. Different sen-
sor areas can be placed for each of these zones. Therefore four completely indepen-
dent day and week programs are editable for each channel.
- 13 -
Load Camera-Setup:
Loads the sensor configuration of the desired camera (red
button). This irrevocably overwrites the setup data of the
PC. The data transmission is performed as described in
"Send Camera-Setup".
Load entire setup:
Load the setup configuration of all four channels and the
global settings of the DMD-4.
The data transmission is performed as described in "Send
Camera-Setup".
First of all the zone to be defined
is selected with the camera- and
timezone-buttons:
The timezone 1 is always dis-
played in the upper half, one of
timezone 2-4 in the lower half of
the window. With a mouse click or
Drag & Draw (drag the mouse by
pressed left button) you can define
the active time for timezone 1
(shown as red blocks). In the left
image there is an example for dif-
ferent shopping times. All the pe-
riods of the closed store are regis-
tered in timezone 1 as shown on
the left side.
Advertisement
Table of Contents
