Table of Contents
Advertisement
6.2 Channel setup
6.2.2 Editor:
The editor area with the camera picture of the corresponding channel is divided into
6480 parts, called cells. The sensor area is defined by all highlighted blocks of the cor-
responding color. It is not necessary that all blocks are adjacent to each other. An
overlapping of two or more areas is not allowed.
The editor tool bar provides several functions for the editor display and for positioning
the individual cells:
Define / Delete area:
If a larger area of the sensor area is to be activated or deactivated, this area can be
marked with the mouse:
Deleting cells is performed according to the same principle: The mouse cursor is posi-
tioned on an cell and by clicking the right mouse button the rectangle appears black
and after releasing the right button all cells in the defined area are deactivated.
Define / Delete polygon:
The drawing of a polygon allows a quick area definition:
mouse button. After definition of all edges you have to press the right button for ap-
prox. 2 seconds, and all cells inside of the polygon will be cleared.
Set all cells:
Activates all cells from the current sensor area. If some cells also defined by another
area, only the remained cells will be activated.
Delete current area:
Deletes all cells from the current sensor area.
Show / Hide area display:
Switches between the camera image with or without displayed area in order to check
the right overlaying of picture and cells.
Show all areas: For easier positioning it is possible to display all areas in the
editor. The area that has been selected by the area switch is edited.
Position the cursor in the editor, press the left mouse button and
draw a frame around the desired cells by dragging the mouse.
Depending on the sensor area selected, the rectangle is shown
colored. The corresponding function is executed on the marked
area, after releasing the left mouse button.
By pressing the left mouse button you define the edges of the po-
lygon. If you have keep pressed the left mouse button for 2
seconds: All cells inside of the polygon turn in the area colour
and are activated.
Deleting cells is performed according via the right button: the
edges of the deleting polygon are defined by pressing the right
- 20 -
Advertisement
Table of Contents
