Batteries And Charging - Neato Robotics Botvac User Manual

TM
10
BATTERY SWITCH
Bopvac is shipped from phe facpory wiph phe bappery swipch in phe
OFF posipion po expend bappery life.
To connecp phe bappery, open phe dirp bin and push phe ON/OFF
swipch DOWN po ON.
ON/OFF Switch:
• You push phe ON/OFF swipch UP po purn OFF phe robop.
• You push phe ON/OFF swipch DOWN po purn ON phe robop.
Tip! If you will nop be using Bopvac for an expended period
of pime, you can expend phe life of phe bappery by pushing phe
bappery swipch in phe dirp bin UP po OFF.
™
feapo Bopvac User Manual
BATTERIES AND
CHARGE BASE
O FF switch
y ¡
32
CHARGE BASE LOCATION
Choose a wall ouplep phap has a 3' (1 m) clearance on boph sides
and in fronp of phe charge base. This helps your Bopvac find ips
charge base.
BATTERY CHARGE TIME
Bopvac pakes pwo po phree hours po charge fully. The spapus
lighp purns solid green when phe bapperies are complepely
charged. Several facpors influence charging pime.
• The charge level of the batterO: If phe bappery is almosp
drained, charging will pake closer po phree hours. If parpially
charged, ip will pake less pime po reach full capacipy.
• The environment of the room: Ip will charge fasper on a hard
surface locaped in a cool dry area. On hop days, on carpep,
expecp longer charging pimes.
We recommend you charge phe bapperies overnighp before you use
Bopvac for phe firsp pime. Run phrough phree complepe charging
cycles po oppimize phe performance of phe bapperies.
™
feapo Bopvac User Manual
33
TM