Rapid ignition system
The appliance is supplied with a rapid
ignition system with the following fea-
tures:
– Rapid ignition without pressing and
holding the control,
– Automatic re-ignition
Should the flame be extinguished by
a gust of air, the burner will re-ignite
automatically. If re-ignition is unsuc-
cessful, the gas supply will be cut off
automatically (see "Flame failure
monitor").
Switching on
Fire hazard.
Do not leave the appliance unatten-
ded whilst it is being used.
The control knob for the burner must
be pressed in and turned anti-clock-
wise to the large flame symbol to
switch on. The ignitor will "click" and
ignite the gas.
When a control knob is activated, a
spark is developed automatically on all
burners. This is normal and does not
indicate a defect.
If the burner fails to ignite, turn the
control knob to the "" position. Air
the room or wait at least 1 minute be-
fore trying again.
If the burner does not ignite the
second time, turn the control knob
back to "" and see "What to do
if ...".
You might hear the burner re-igniting
as it switches itself back on
(1-2 clicks), for instance, in the event
of a draft.
Operation
25